Home > News > Content
Plastic Extruder Maintenance Methods!
- Jan 25, 2018 -

1. The plastic extruder equipment should be placed in the ventilation position to ensure that the motor work heat distribution, prolong its life; the machine should be kept well grounded.

2. Regular inspection tool screws, the new machine use 1 hours later, with tools fastening knife, fixing the screw of the knife, strengthening the fixation between the blade and the tool holder; the bearing should be lubricated regularly to ensure the lubrication between the bearings; In order to ensure the sharpness of the cutting tool, it is necessary to check the cutting tool to ensure its sharpness and reduce the blunt shortage of blade. Unnecessary damage to other parts, check the belt slack periodically and tighten it in time.

3. Reboot--Before the second start, should remove the remaining debris in the machine room, reduce the starting resistance. The inertia cover and the belt wheel cover should be opened periodically, and the bottom of the flange is cleared out, and the powder is discharged into the shaft bearing by the crushing machine chamber.

4. Replacement parts--when the tool is replaced, the clearance between the moving knife and the fixed knife: 20HP above the crusher 0.8MM is better, 20HP below the crusher 0.5MM is preferred. The thinner the recycled material, the better the clearance can be suitably adjusted.